Introducing our Moldatherm Heaters

These unit heaters for electrical heating and resistance heating are easy to assemble and can be custom-ordered.

Our Moldatherm series unit heaters in the forms of standardized cuboid (plain type), half-cylindrical (half-cylinder type) or 1/4-cylindrical (quarter-cylinder type) are easy to assemble and easy to replace for maintenance. Custom-made types are also available. Consult us about the size, usage, temperature settings and more. For custom-made types that are not included in the attached specifications table, feel free to contact us.

Block construction method makes assembly and maintenance so easy!

The furnace can be easily assembled by sequentially following steps 1 to 3 shown on the right. Maintenance is easy, too.

More energy saving and higher efficiency for
electrical heating furnaces and resistance heating furnaces

The advantages of the Moldatherm heater series unit heaters for electrical heating and resistance heating are light weight, low heat storage and energy saving. See the comparison between a stainless steel wire annealing furnace using a Moldatherm heater and a brick body furnace made by our competitors.

Introducing Moldatherm(LGO)...

The comparison of Koyo Thermo Systems Moldatherm heaters and bricks in stainless annealing furnace.

  • Moldatherm(LGO)
  • Bricks use
  • 1.Heating-up time is one fifth bricks furnaces.

    78%Less

    A small amount of heat storage will drastically shorten the heating-up/cooling-down time during furnace operation. In addition, it extends the uptime of the equipment while simplifying intermittent operation shifts, thus making it a highly productive furnace.

  • 2.External wall temperature is reduced with high heat insulating.

    58%Less

    The high insulation effect of the Moldatherm (LGO) lowers the wall temperature of the furnace which helps create a high work efficiency environment.

  • 3.Electric energy is 30% reduced with little heat loss.

    30%Less

    The Moldatherm (LGO) has low thermal conductivity which reduces heat dissipation. Because it does not emit any unnecessary heat, electricity costs during operation are low.

Tissue characterization (Background information)

Item Specifications
R: regular-type RLS: high-temperature
quality of material Al2O3-SiO2
quality of material Fe-Cr-Al
Max. operation Temperature 1100°C 1200°C
Coefficient of thermal conductivity 0.20w/m·K (In the atmosphere · at 1000°C)
0.17w/m·K (In the atmosphere · at 800°C)
0.15w/m·K (In the atmosphere · at 600°C)
Specific heat 1130J/kg·K
Degree of density 210kg/m3 230kg/m3
Contraction percentage 0~2.5%
(800~1100°C)
0~1.9%
(900~1200°C)

Please click here for inquiries.